Our purpose is to support owners in their use and maintenance of the Porsche 928 and to foster camaraderie among owners throughout the world.
Welcome, Guest
Username: Password: Remember me

TOPIC: Replacing the Rear Tailight 1990

Replacing the Rear Tailight 1990 17 Apr 2017 18:45 #19649


  • Posts:2
  • Bill99's Avatar
  • Bill99
  • New Forum Member
  • OFFLINE
  • Karma: 0
Where can I find out how to replace the tail light lens on my 1990 Porsche 928?
The administrator has disabled public write access.

Replacing the Rear Tailight 1990 17 Apr 2017 19:11 #19650


  • Posts:146 Thank you received: 15
  • billvvSU's Avatar
  • billvvSU
  • Administrator
  • OFFLINE
  • Karma: 0
If it's like my '89, you have to replace the whole assembly. Inside the hatch behind the tail light there's a knurled knob. Remove it and push on the stud and the tail light pivots out on its far outboard end and is removed from outside the car. There's a plug that disconnects and you can carry it over to the bench. Bulbs are replaced from the rear of the assembly, where there is a wiring harness.
The administrator has disabled public write access.

Replacing the Rear Tailight 1990 17 Apr 2017 19:11 #19651


  • Posts:146 Thank you received: 15
  • billvvSU's Avatar
  • billvvSU
  • Administrator
  • OFFLINE
  • Karma: 0
If it's like my '89, you have to replace the whole assembly. Inside the hatch behind the tail light there's a knurled knob. Remove it and push on the stud and the tail light pivots out on its far outboard end and is removed from outside the car. There's a plug that disconnects and you can carry it over to the bench. Bulbs are replaced from the rear of the assembly, where there is a wiring harness.
The administrator has disabled public write access.
Moderators: mm928
Time to create page: 1.740 seconds